Rear Panel - QSC DSP-4 Hardware Manual

INTRODUCTION-

Rear Panel

Overall
6
Connector & Indicator Descriptions
DATAPORT (unlabeled): This is the "output"
DataPort.
If the DSP-4 is directly mounted on a 2-RU, 2
channel QSC DataPort equipped amplifier, this
connector plugs into the amplifier's DataPort con-
nector.
If used with 3-RU, 4- or 8-channel QSC DataPort
equipped amplifiers, the DSP-4 module will need
to be remotely mounted and a male-female
DataPort cable used to interconnect the amp &
module.
If used with a non-DataPort amp (QSC or other),
this connector will not be used.