Unpacking; What Is Included, What Else May Be Needed - QSC DSP-4 Hardware Manual

Digital signal processor amplifier accessory
Hide thumbs Also See for DSP-4:
Table of Contents

Advertisement

INSTALLATION-

Unpacking

It is recommended that you keep the original packing material for reuse in the rare event that service be required for your DSP-4. If service
is required, and the original packing material is not available, insure that the DSP-4 is adequately protected for shipment (strong box of
appropriate size , sufficient packing material).
What is included in the carton:
Item
Description
1-
DSP-4 Digital Signal Processor
2-
#4-40 machine screw, 1.88" long
3-
#8-32 machine screw, 0.312" long
4-
Hardware Manual (this document)
5-
Signal Manager Software CD disk
What else will I need?
1- 200 MHz. Pentium PC (minimum) with CD-ROM, 32 MB or more RAM, 10 MB or more hard drive space available, an available COM (RS-
232) port capable of 38.4k baud, Windows 98, Windows 2000, Windows XP, or NT4.0 with service pack 6a or later, SVGA display at 800
x 600 minimum resolution (1024 x 768 recommended).
2- An RS-232 cable (9-pin serial data cable). This cable attaches your PC to the DSP module. It should be a male-to-female type and no longer
than 25 feet.
Other accessories that may be required (depending on application)-
DPX-2 DataPort Cable
(module to amplifier)-
cable is a 6 foot long male-female
DataPort cable used for connect-
ing the DSP-4 module to a
DataPort equipped amplifier.
DPC-X DataPort Cable
(module to CM16a)-
is a custom length male-male
DataPort cable used for connecting
the DSP-4 module to a QSC
amplifier network monitor, such as
the CM16a. Length can be
specified from 1 to 10 feet, replace
"X" suffix with length in feet.
Unpacking and What Else You'll Need
This
This cable
Quantity
1
2
1
1
1
DPX-1 External Power Supply-
The DPX-1 is used in applications
where the amplifier's DataPort
does not supply operating voltage
to the DSP-4 module. This includes
non-DataPort amplifiers and
certain models of QSC DataPort
equipped amplifiers (see Appendix
for details).
DPX-4 Mounting Bracket-
The DPX-4 holds up to 4 DSP-4 (or
DSP-3) modules in a highly-
adjustable 19-inch rackmount
configuration. Main bracket comes
with right angle module support
brackets and adjustable rack
mounting ears for optimum
flexibility.
9

Advertisement

Table of Contents
loading

Table of Contents