Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for QSC Q-SYS I/O-22
Summary of Contents for QSC Q-SYS I/O-22
- Page 1 ™ Hardware User Manual I/O-22 TD-000342-00-A *TD-000342-00*...
-
Page 2: Important Safety Instructions
EXPLANATION OF TERMS AND SYMBOLS The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in damage to the equipment that may not be covered under the warranty. - Page 3 Damage to, or loss of any software or data residing on the product is not covered. When providing repair or replacement service, QSC will use reasonable efforts to reinstall the product’s original software configuration and subsequent update releases, but will not provide any recovery or...
-
Page 4: Rohs Statement
RoHS STATEMENT The Q-Sys I/O-22 products are in compliance with European Directive 2002/95/EC – Restriction of Hazardous Substances (RoHS). The Q-Sys I/O-22 products are in compliance with “China RoHS” directives. The following chart is provided for product use in China and its territories: Q-Sys I/O-22 部件名称... - Page 5 Q-LAN operates over gigabit and higher rate Ethernet variants. Q-LAN is a central component of QSC’s comprehensive Q-Sys integrated system platform. Interactive integration with Q-Sys means that Q-LAN can be configured and monitored using the graphical and scripting tools available on the Q-Sys platform.
- Page 6 I/O-22 Connector Panel Features — Figure 1 — 1. LAN Port A (Q-LAN Primary) PoE (RJ-45) 8. RS-232 Connector 2. LAN Port B (Q-LAN Redundant) PoE (RJ-45) 9. Two GPIO Connectors (6-Pin Euro-Style connector) 3. Status LED 10. Line Out 1 and 2 (3-Pin Euro-Style connector) 4.
- Page 7 I/O-22 Rear Panel Features — Figure 3 — 1. Bracket Securing Holes – “Mounting Option 1” on page 9 3. Rear Bracket Mounting Pin 2. Bracket Mounting Slots – “Mounting Option 2” on page 10 4. Bracket Securing Holes and Screws– “Mounting Option 2” on page 10...
- Page 8 The Q-Sys solution (Figure 4) is designed to be deployed on QSC’s high performance Q-LAN network. Q-LAN is a proprietary network implementation that bundles several industry standard protocols into a data transport solution appropriate for live performance multimedia environments. Q-LAN offers gigabit data rates, device and network redundancy, 32-bit floating point audio data transfers, and low-latency support on local area network deployments.
-
Page 9: Mounting Option
If service is required and the original packing material is not available, ensure that the unit is adequately protected for shipment (use a strong box of appropriate size with sufficient packing/padding material to prevent load shifting or impact damage), or call QSC’s Technical Services Group for replacement packing material and a carton. - Page 10 Mounting Option 2 Mounting Option 2 secures the Mounting Bracket to the I/O-22, then the Mounting Bracket and I/O-22 are mounted to the mounting surface. You can easily remove the I/O-22 and Mounting Bracket assembly from the mounting surface. 1. Using the Mounting Bracket as a template, mark the four four-way screw slots (Figure 7) on the mounting surface.
- Page 11 Connections When making connections to the I/O-22, make sure that the cables are secured in such a was as to provide stress relief for all connectors you use. — Figure 9 — 1. Q-LAN A — PoE/PoE+ capable (RJ-45) — Required. ◦...
- Page 12 I/O-22 Dimensions The dimensions for width and depth are the same with or without the bracket. The dimension for depth includes the RS-232 connector. 9.10" 231 mm 6.20" 157.5 mm — Figure 10 —...
-
Page 13: Line Input
I/O-22 Specifications Line Input Dynamic Range ROTE!: The Dynamic range depends on the "Peak Input Level" setting. Unweighted At -27 to +12 setting, Dynamic range is >98 dB minimum, and >100 dB typical At -56 to -28 setting, Dynamic range is >83 dB minimum, and >88 dB typical A-weighted At -27 to +12 setting, Dynamic range is >101 dB minimum, and >103 dB typical At -56 to -28 setting, Dynamic range is >86 dB minimum, and >91 dB typical... - Page 14 I/O-22 Specifications Controls and Indicators Status LED Green Power LED Green ID button When pressed, the associated ID button in the Q-Sys Design flashes Locate LED Green Flashes when its associated ID button is pressed in the Q-Sys design Power Source ROTE!: You must use either the AUX PWR or PoE.
- Page 15 © 2012, QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. Q-Sys, Q-LAN, Q-Sys Core Processor, Q-Sys Core 1000, Q-Sys Core 3000, Q-Sys Core 4000, Q-Sys I/O Frame, and Q-Sys Designer are trademarks of QSC Audio Products, LLC.