QSC DSP-3' Specification Sheet

After three decades of developing pioneering
audio products and systems, QSC raises the bar
once again, setting a new standard in signal
processing with the new DSP-3 Digital Signal
Processing Module.
The DSP-3's two channels of independent signal
processing deliver more power, flexibility, and
features—in short, more of everything you really
need in a DSP—for less. Simple to install and
compact, the DSP-3 is the advanced and
affordable digital signal processing solution for
your audio system.
Optimize Your Sound With DSP From QSC
Powerful
The DSP-3's powerful processor allows you to perform a wide range of signal
processing functions. Whether you need speaker crossovers, EQ, time delay,
or subsonic filters, the DSP-3 is as flexible as your system's needs.
Each channel includes:
• Crossover filtering
• Multiple Parametric EQs
• Shelf filtering
• Multiple Delays (up to 910 ms)
Save space and weight by plugging the DSP-3 into the back of
most DataPort-equipped QSC amplifiers. Or use multiple DSP-3s
as a stand-alone, rack-mountable DSP solution.
A D V A N C E D
• Compression and limiting
• Precision attenuation
• Mixing
• Tone or noise generation
S Y S T E M S
Configurable
The DSP-3's processing horsepower is dynamically assignable so you are not
limited by a fixed signal chain. Simply use the powerful PC-based Signal
Manager software to easily configure multiple processing functions and
signal flow with "drag-and-drop" tools.
Cost-effective
The power and flexibility of the DSP-3's eliminates the need for expensive
outboard processing gear, reducing cost and installation time for almost
any application. The compact DSP-3's also plug directly to the back of
most QSC DataPort-equipped amplifiers for use in systems where rack
space is a premium.
1675 MacArthur Boulevard
Costa Mesa, CA 92626
Ph: 800/854-4079 or 714/957-7100
Fax: 714/754-6174
www.qscaudio.com
Hear the Power of Technology. email: info@qscaudio.com
P R O D U C T S