To Confirm That The Water Filter Has Been Changed; Using An External Water Filter - Miele F 1472 Vi Operating And Installation Instructions

Water filter
^ After the filter has been changed, the
reminder to change the filter will
continue to flash in the display.
Confirm that the filter has been
changed.
To confirm that the water filter
has been changed
^ Place a finger on the water filter
change display and leave it there.
^ Place another finger on the access
sensor (do not release the water filter
change display) and keep both
sensors covered for approx.
5 seconds, until a tone sounds.
The water filter change has now been
confirmed and the reminder for the next
filter change activated.
The reminder to change the filter will
now go out in the display.
^ Close the door.
All ice cubes that are produced in
the 24 hours after you have changed
the water filter should be discarded.
52

Using an external water filter

If an external water filter is installed in
the household, please leave the stan-
dard (bypass) filter in the appliance.
If you use an external water filter and
therefore wish to deactivate the
reminder to change the water filter,
please contact the Miele Service
Department.