Cleaning The Drip Tray; Cleaning The Door Seal; Cleaning The Ventilation Gaps; Cleaning The Water Filter (Intensiveclear 2.0 Mesh Filter) (See "Optional Acces- Sories") - Miele F 2462 Vi Operating And Installation Instructions

 To reinsert the ice container, push it
into the appliance until it clicks into
position.
 If you cannot push the ice container
back in all the way, turn the screw
conveyor inside a little.

Cleaning the drip tray

The drip tray catches excess water.
To avoid a build-up of odor, the drip
tray should be cleaned every day.
 Remove the drip-tray cover.
 Remove the drip tray and clean it.
 Dry the drip tray with a cloth.
 Replace the drip tray and the drip-
tray cover.

Cleaning the door seal


Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
 The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning and care

Cleaning the ventilation gaps

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dust
brush, for example).
Cleaning the water filter (Inten-
siveClear 2.0 mesh filter) (see
"Optional accessories")
Depending on the quantity of ice cubes
produced, the IntensiveClear 2.0 mesh
filter must be cleaned approx. every
6 months.
You can use the Replace the water filter
display on the display as a reminder to
clean the water filter.
 Turn the cap of the filter cartridge
counterclockwise until it is in the hori-
zontal position 1. and slide it out of
the filter opening 2.
105