Chilled Water; Ice Cubes And Crushed Ice - Miele F 1472 Vi Operating And Installation Instructions

Ice/water dispenser
Discard the ice cubes produced
during the first 24 hours and do not
consume any chilled water or
ice/crushed ice during this period,
as the water will have been used to
rinse through the pipework.
This also applies when using the
appliance again after not having
used it for a while.

Chilled water

^ Place a suitable container
underneath the ice/water dispenser
spout.
^ Touch and keep your finger on the
chilled water sensor.
Chilled water will be dispensed from
the spout as long as the sensor is being
touched.
After a while dispensing will stop
automatically. Press the sensor again if
you wish to dispense more water.
Fill the container with ice cubes
beforehand if you want it to be
colder.
36

Ice cubes and crushed ice

Remember it can take up to
24 hours to produce the first ice
cubes.
^ Place a suitable container
underneath the ice/water dispenser
spout.
^ Touch and keep your finger on the
sensor for ice cubes or crushed ice.
Ice will be dispensed from the spout as
long as the sensor is being touched.
After a while dispensing will stop
automatically. Press the sensor again if
you need more ice.
Take your finger off the sensor when
the container is almost full.
Otherwise it will overfill or the ice will
block the dispensing spout.
The ice cube maker can make up to
150 ice cubes in 24 hours.
The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer. The lower
the temperature, the more ice cubes
are produced within a certain time
frame.