Cleaning The Door Seal; Cleaning The Ventilation Gaps; Cleaning The Water Filter (Intensiveclear 2.0 Mesh Filter) (See "Optional Acces- Sories") - Miele F 29 2 Vi Series Operating And Installation Instructions

Table of Contents

Advertisement

Cleaning and care

Cleaning the door seal

Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
 The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.

Cleaning the ventilation gaps

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dust
brush, for example).
100
Cleaning the water filter (Inten-
siveClear 2.0 mesh filter) (see
"Optional accessories")
Depending on the quantity of ice cubes
produced, the IntensiveClear 2.0 mesh
filter must be cleaned approx. every
6 months.
You can use the
Replace the water filter
display on the display as a reminder to
clean the water filter.
 Turn the cap of the filter cartridge
counterclockwise until it is in the hori-
zontal position 1. and slide it out of
the filter opening 2.
 Pull the mesh out of the back of the
filter cartridge 3.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents