To Confirm The Water Filter Has Been Changed; Using An External Water Filter - Miele F 1471 Vi Operating And Installation Instructions

Water filter
^ After the filter has been changed, the
reminder to change the filter will
continue to flash in the control panel.
Confirm that the filter has been
changed (see "To confirm the water
filter has been changed").
To confirm the water filter has
been changed
^ Touch and keep your finger on the
symbol that reminds you to change
the water filter.
^ Then place another finger on the
access sensor (without moving your
finger from the water filter symbol)
and leave both fingers there for
approx. 5 seconds until you hear a
tone.
The replacement of the water filter has
now been confirmed and the prompt to
remind you of the next water filter
change has been activated.
The reminder to change the filter will
now go out in the control panel.
^ Close the appliance door.
48
All ice cubes that are produced in
the 24 hours after you have
changed the water filter should be
discarded.

Using an external water filter

If you have already installed an external
water filter in your home, still leave the
water filter (bypass filter) in place that is
supplied with the appliance.