System Lock; Lighting - Miele F 1472 Vi Operating And Installation Instructions

If the sensor is flashing, the drip
tray needs to be emptied and
dispensing is stopped automatically.
Mop out the drip tray with a sponge
or cloth.
If the appliance has been switched
off for a long period of time, discard
the chilled water and ice that is
produced in the 24 hours after the
appliance has been switched on
again.
If the ice/water dispenser is not used
again within 2 minutes or if the door
is opened, the ice/water dispenser
will switch to standby mode
automatically and the lighting will go
out.
After it has been activated again, it
can take a few seconds before
chilled water and ice can be
dispensed again.
It is important to empty the ice cube
container regularly, particularly if
you have not used any ice cubes for
more than a week. This ensures that
ice is always fresh and prevents ice
cubes clumping together.
Ice/water dispenser

System lock

You can use the system lock to prevent
the ice/water dispenser from being
used without your knowledge, by
children, for example.
^ Touch the
sensor to highlight it in
yellow.
The ice/water dispenser sensors are
now locked. To deactivate the system
lock,
^ Touch the
sensor to highlight it in
white.

Lighting

To switch the ice/water dispenser
lighting on or off,
^ touch the lighting sensor until it is
highlighted in yellow (lighting on) or
white (lighting off).
37