Table of Contents
Advertisement
When you have adjusted the
temperature, wait for approx. 6 hours
if the appliance is not very full and
for approx. 24 hours if the appliance
is full before checking the temperature
display, as it will take this long for the
appliance to reach the temperature. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Temperature range
The temperature in the freezer can be
adjusted:
– with the ice/water dispenser
switched off: from -14 °C to -24 °C
– with the ice/water dispenser
switched on: from -18 °C to -24 °C
The ambient temperature in the
room and the installation location
can affect the time it takes for the
appliance to reach the lowest
temperature. If the ambient
temperature is too high, the
appliance may not reach the lowest
temperature.
The correct temperature
Temperature
(Fahrenheit/Celsius)
The temperature can be displayed in
degrees Celsius or degrees Fahrenheit.
^ Touch the access sensor so that it is
highlighted in yellow.
^ Take note of the position of the X
sensor (but do not touch it!).
^ Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.
^ Place your finger in the position of the
X sensor, and leave it there.
^ At the same time, briefly touch the
access sensor (without moving your
finger from the X sensor).
^ Leave your finger on the X sensor for
another 4 seconds until c and the Y
sensor also appear in the display.
^ Now touch the X sensor repeatedly
until † appears in the display.
^ Touch the access sensor again.
23
Hide quick links:
Advertisement
Table of Contents
