Before You Do Your First Wash - Fisher & Paykel WashSmart Installation Instructions And User Manual

You owe it to yourself and your washer to have your machine installed correctly.
Before you start, it is a good idea to go through the following checklist:
Has the basepacker been removed? Refer to page 3.
1
Is the drain hose threaded through the 'U bend' (with no more than 20 mm extended) and
2
hooked into your standpipe? Refer to page 3.
Is the hot hose connected to the Hot valve marked 'H'? Is the cold hose connected to the Cold
3
valve marked 'C'? Refer to page 4.
Is the machine correctly levelled, feet are extended and cabinet corners are clear of the floor?
4
Refer to page 5.
Have you performed the installation test cycle? Refer to page 6.
5

Before you do your first wash

Fig.9 WashSmart™ washer
7