Customising Wash Cycles - Fisher & Paykel WashSmart Installation Instructions And User Manual

To customise a cycle
You can program your WashSmart™ washer to remember the wash options you prefer for
each wash cycle. For instance, you may want to set the REGULAR cycle to default to a WARM
wash or set HEAVY cycle to include a SOAK.
Touch POWER.
1
Touch and hold the button of the wash cycle you want to customise for 3 seconds, eg
2
REGULAR. You will hear a beep and the display will show "SEt". The light above the cycle
button will also flash.
Select your preferred setting, and any other options you wish to customise for this cycle.
3
Touch the button of the wash cycle you are customising again, eg REGULAR, to store your
4
customised cycle (a long beep will sound to confirm the changes have been saved).
To change your customised wash cycle simply repeat these steps.
Fig.22 Customising a wash cycle, eg REGULAR cycle

Customising wash cycles

21