Fisher & Paykel WashSmart Installation Instructions And User Manual page 28

Changing pre-set options
26
Factory reset
You can reset your washer to the settings it left the factory with:
Enter Option Adjustment mode (refer to page 22).
1
Select the ALLERGY cycle.
2
The display will show "rSt". Touch and hold START / PAUSE for 3 seconds to reset your washer to
3
its factory settings.
Note: this action will reset the washer to the default settings, exit Option Adjustment mode and
restart the washer in normal operating mode.
Touch POWER to exit if you do not wish to reset your washer.
Fig.30 Changing the washer back to the factory default settings
Remember, to save changes and exit from the Option Adjustment mode (ie to return to normal
operating mode), touch the POWER button.