Fisher & Paykel WashSmart Installation Instructions And User Manual page 11

Using your washer
The buttons require only a gentle touch to activate.
Touch POWER to activate your WashSmart™ washer.
1
Select your desired wash cycle by touching the corresponding button (refer to page 16).
2
Choose your wash options, eg you may want a WARM wash temperature and a SLOW spin speed
3
(refer to pages 17 – 19).
Touch START / PAUSE to start the cycle. The washer will start to fill with water and select the
4
correct wash action for your load.
For best fabric and colour care, remove your clothes as soon as the cycle has finished.
Use KEYLOCK mode to lock the buttons on the display, which prevents them from being activated
5
accidently by a washing basket or little fingers (refer to page 10).
DELAY START allows you to delay the start of your wash by 5 mins up to 18 hours (refer to page 19).
6
6
If you wish to stop your WashSmart™ washer
Press START / PAUSE.
During a spray rinse or spin, there will be a slight delay while the bowl slows to a stop and the lid
is unlocked.
Important!
Failure to follow the advice in this guide may result in damage to your garments, and your
expectations of wash performance may not be met.
Getting started quickly
3 4
9