Fisher & Paykel WashSmart Installation Instructions And User Manual page 34

Table of Contents

Advertisement

Before you call for service
32
"Sud LoC" (suds lock – I have too many suds)
The machine has a suds build-up (too much detergent may have been used for the amount of
soil in the load). Wait for suds to dissolve (about 20 min). Rinse clothes using a deep rinse.
Check the standpipe height does not exceed 2400 mm.
If the symptom persists, call your Fisher & Paykel Dealer or Authorised Repairer.
"LId LoC" or "LId opn" (lid lock or lid open – I can't lock the lid or the lid is open)
Make sure the lid is closed.
Press START / PAUSE (refer to page 11).
If the symptom persists call your Fisher & Paykel Dealer or Authorised Repairer.
"too FUL" (too full – I am overloaded)
The machine is overloaded and can not agitate. Ensure the machine is stationary. Remove
items until the remaining ones can move freely.
Select a higher water level.
Single beep every second and... possible solutions
Three digit fault code displayed on screen
Turn your machine off at the wall,
1
Wait for 60 seconds and turn it back on.
2
Check the machine is level (refer to page 5).
3
Remove load and retry.
4
Complete a deep RINSE and SPIN.
5
If the fault re-occurs repeat Step 1.
6
If the machine still will not work call your Fisher & Paykel Dealer or Authorised Repairer to
arrange service (refer to page 38).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents