Machine Information - Fisher & Paykel WashSmart Installation Instructions And User Manual

Specifications
Model
WA1068G
* Height is measured to the highest point on the console.
Note:
The exact height of your washer is dependent on how far the feet are extended from the base of
the machine.
Depth of the machine is the cabinet only, ie this does not include the distance the hoses and
drainpipe extend out from the back of the cabinet. Another 50 mm should be allowed for in the
installation cavity to accommodate the inlet hoses and drain hose.
Electrical supply: 220 V – 240 V, 50 Hz Sinusoidal, 10 A
Inlet water static pressure: Max. 1 MPa (150 psi), Min. 34 KPa (5 psi)
Inlet water flow rate at tap: Min. 6 litres / min
Standpipe height: 850 – 2400 mm
Capacity Depth
10.0 kg 700 mm

Machine information

Width Height*
685 mm 1020 – 1050 mm 1410 – 1440 mm
27
Height (lid open)