Changing Pre-Set Options - Fisher & Paykel WashSmart Installation Instructions And User Manual

Changing pre-set options

22
Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the options to
suit your wash needs.
There are a number of pre-set options, which can be altered:
The wash temperatures, including changing the COLD wash temperature to CONTROLLED COLD.
1
The out of balance recovery routine.
2
The number of beeps at the end of the cycle.
3
Resetting to factory default settings.
4
To enter Option Adjustment mode
Turn machine on at the wall but do not press POWER.
1
Touch and hold the KEYLOCK and START / PAUSE buttons
for 3 seconds. You will hear 3 quick beeps indicating
you have entered Option Adjustment mode. The
machine will show the default setting for the COLD wash
temperature.
The diagram on page 23 shows how the wash cycle
icons relate to the options you can change.
Pages 24 – 26 explain the different options in more detail.
Use the buttons on the panel to make your changes to
2
the pre-set options.
Press POWER to return to normal mode. Your washer will
3
automatically remember your changes.
Fig.23 Entering Option
Adjustment mode