Before You Do Your First Wash - Fisher & Paykel WA3927G1 Installation Instructions And User Manual

You owe it to yourself and your Fisher & Paykel WashSmart to have it installed correctly by an
Authorized Service Agent.
Before you start, it is a good idea to go through the following checklist:
Has the base packer been removed?
1
Is the drain hose threaded through the 'U bend' hose guide (with no
2
more than 3/4" (20 mm) extended) and hooked on to your standpipe or
tub/sink?
Is the hot hose connected to the hot valve marked 'H'?
3
Is the cold hose connected to the cold valve marked 'C'?
Is the washer leveled correctly, with the feet extended and cabinet
4
corners clear of the floor? Refer to pages 11 and 12.
Have you performed the installation test cycle? Refer to page 13.
5
Electric Shock Hazard
Read and follow the IMPORTANT SAFETY INSTRUCTIONS outlined in this
User Guide before operating this appliance, pages 3 – 5.
Failure to do so can result in death, electric shock, fire or injury to
persons.
WashSmart water consumption
*Regular cycle is the default wash cycle for WashSmart.
Note: water consumptions are based on the WashSmart default settings.

Before you do your first wash

Load Size
22 lb (10 kg)
15.5 lb (7 kg)
11 lb (5 kg)
7 lb (3 kg)
2 lb (1 kg)
WARNING!
Regular*
31 G (117 L)
28 G (108 L)
25 G (93 L)
18 G (69 L)
13 G (49 L)
US
15
CA