Customising Wash Cycles - Fisher & Paykel WA8060E Installation Instructions Manual

To customise a cycle
You can program your washer to remember the wash options you prefer for each wash
cycle. For instance, you may want to set the 'Regular' cycle to default to a 'Warm' wash
or set 'Heavy' cycle to include a 'Soak'.
WashSmart™ Eco washer, WashSmart™ washer and QuickSmart™ washer
Touch 'Power'
1
Touch and hold the wash cycle button you wish to customise eg 'Regular', for 3 seconds.
2
You will hear 2 beeps and the screen will display
Select your preferred settings eg 'Low', 'Cold', '700', 'Eco-Rinse'.
3
Touch the cycle button to store your settings. You will hear a long beep to confirm the
4
changes have been saved.
Power off your washer.
5
To change your customised wash cycle simply repeat these steps.
WashSmart™ Eco washer and WashSmart™ washer (WashSmart™ Eco washer panel is shown)
Customising a wash cycle, eg 'Regular' cycle
QuickSmart™ washer
Customising a wash cycle, eg 'Regular' cycle

CUSTOMISING WASH CYCLES

.
.
33