Alarm Clock - Magellan MG-6060 User Manual

Hide thumbs Also See for MG-6060:

Table of Contents

Retrieving Radio Stations from Memory

To retrieve a radio station saved in memory:

Press the desired key

from the center keypad

that corresponds to the

desired memory location.

Accessing the Radio by Remote Control

By default, your remote control is programmed to turn ON or OFF Magellan's radio and to scroll through the radio stations saved in

memory.

•

The

button on your remote control turns ON or OFF the radio. Press the button once to turn ON the radio and then press the

button again to turn OFF the radio.

•

The

button on your remote control scrolls through the radio stations saved in memory. Everytime you press the button, the

Magellan will scroll to the next radio station saved in memory.

Alarm Clock

You can also use the Magellan console as an alarm clock. At the programmed time, Magellan will begin to play a selected tone or

activate the radio. When the alarm clock is enabled, the alarm clock symbol (Figure 5 below) will appear in the upper left corner of the

LCD screen.

Technical Manuals Online! - http://www.tech-man.com

Figure 5: Alarm Clock Symbol

Alarm clock

symbol

User Guide

Table of Contents