Standard Fire Zones; Delayed Fire Zones - Magellan MG-6060 User Manual

Hide thumbs Also See for MG-6060:

Table of Contents

Standard Fire Zones

During a fire alarm, the siren emits an intermittent sound (

Zone, your system can immediately send an alert to your Central Monitoring Station. To disarm a false alarm:

User code

If the zone is a Delayed Fire Zone, there is an automatic delay before your system contacts your Central Monitoring Station. Refer to

Figure 3 on page 20 to prevent unnecessary reporting of false alarms. To clear a fire alarm triggered by accident:

Clear problem from area (i.e. smoke around

the smoke detector).

Press within

30 seconds

of alarm

If you are unable to cancel the false alarm, your system will send an alert. Call your Central Monitoring Station to advise them of the false

alarm.

Arming / Disarming

Technical Manuals Online! - http://www.tech-man.com

Call your Central Monitoring Station quickly

to advise them of the false alarm.

If the problem remains after 90 seconds, the

alarm will sound again.

) until silenced or reset. If the zone is a Standard Fire

BEEP

Alert will be

delayed by

another 30

seconds

Table of Contents