Connecting Magellan To Winload; Connecting A Paradox Memory Key (Pmc-3) - Magellan MG-6060 Programming Manual

Connecting Magellan to WinLoad

Standard
Computer
DB-9 cable
containing
(9-pin serial
WinLoad
cable)
software

Connecting a Paradox Memory Key (PMC-3)

Jumper ON:
Read from and/or write to memory key
Jumper OFF:
Write protected (Read from the memory key
only)
Download Data to Destination Console
To download the data of a memory key into a console:
1. Remove power from the Magellan console (AC and battery) and
connect the memory key to the 5-pin connector on the left side of the
back of the console as shown above.
2. Re-apply both AC and battery power to the console.
3. Press the [ OK ] key and Magellan will begin downloading the data from
the memory key.
Copy Data to Memory Key from Source Console
To copy the contents of a console into the memory key.
1. Remove power from the Magellan console (AC and battery) and
connect the memory key to the 5-pin connector on the left side of the
back of the console as shown above. Re-apply both AC and battery
power to the console.
2. Press the [ NEXT ] key and then the [
copying its data into the memory key.
20
Figure 12: Connecting Magellan to WinLoad
306
Adapter
4-pin
connector
cable
Figure 13: Connecting a Paradox Memory Key (PMC-3)
PMC-3
OK ] key. Magellan will begin
Back view of the
Magellan console.
4- to 10-pin cable
(supplied with the
306 Adapter)
The installer code of the Magellan console used to
download data to the memory key must be the same
installer code programmed in the Magellan console that is
to download the contents from the same memory key. If the
installer codes do not match, the contents of the memory
key cannot be downloaded into the receiving console.
Example: The contents of the Magellan console A will be
copied into memory key B. The installer code for console A
is 111111. In order to download the contents of memory key
B into the Magellan console C, the installer code
programmed in console C must also be 111111.
Back view of the
Magellan console.
Programming Guide