How To Operate The Tuner; Tuning To A Station - Eclipse CD8051 Owner's Manual

How to operate the tuner

How to operate the tuner
First, press the [SOURCE] button to start tuner operation.
There are automatic and manual methods for setting stations
in memory. The receiver will accept up to 24 stations in
memory: six in AM and 18 in FM (6 each for FM1, FM2 and
FM3.) (Initial setting)

Tuning to a station

1 .
When switching the tuner band, switching becomes cyclic
in the order of FM1 FM2 FM3
is used and switching becomes cyclic in the order of
AM1 AM2 AM3
Therefore, AM cannot be switched with the [BND ] button
and FM cannot be switched with the [BND
The number of bands that cycle depends on the setting.
See "Changing the number of bands (Page 56)".
46
Tap the [ BND ] button to switch to the
desired FM or AM bands.
[BND ] button Switch the FM band.
[BND ] button: Switch the AM band.
It is also possible to change the numbers of FM and AM
bands in a certain combination of them (See Page 56).
[SOURCE] button
Pressing the button repeatedly
switches the FM band in the order of
FM2 ... .
FM1
Pressing the button repeatedly
switches the AM band in the order of
AM2 ... .
AM1
... if the [BND ] button
... if the [BND
] button is used.
[ BND ] button
] button.