Eclipse CD8051 Owner's Manual page 88

How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
Calling the level memory
The stored speaker level is called.
1. Press the [FUNC] button.
2. Press button [3] for less than one second.
3. Press any number button for one second.
4. Press the [FUNC] button.
Adjusting the center-level blend
This is a function to blend the sound of the center channel
with that of the right and left front speakers when the Dolby
pro-logic function is ON and this is a function of the Dolby
standard for car audio equipment. This function is used to
make adjustments for a music listener who is not directly
facing the center speaker.
1. Press the [FUNC] button.
2. Press and hold button [3] for more than two
3. Make adjustments by pressing button [5] or [6].
4. Press the [FUNC] button to return to the setting
5. Press the [FUNC] button again to cancel the setting
88 88
The state shifts to the level memory mode.
The stored speaker level is called.
The level memory mode will be canceled to return to
the normal status.
seconds to shift to the setting mode.
Button [5]: DOWN
Button [6]: UP
mode.
mode.
Button [4]
[FUNC] button