Eclipse CD8051 Owner's Manual page 86

How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
[AUDIO CONTROL]
button
Adjusting the delay (distance) setting
speaker
1. Press the [FUNC] button.
2. Press and hold button [3] for more than two
3. Press button [1] to shift to the speaker setting
4. Press button [6].
5. Turn the [AUDIO CONTROL] button to the left or
6. Press the [FUNC] button to return to the setting
7. Press the [FUNC] button again to cancel the setting
Adjusting the speaker level
The speaker level is adjusted based on the test tone output
from each speaker.
1. Press the [FUNC] button.
2. Press and hold button [3] for more than two
3. Press button [2] to shift to the speaker level
86 86
Buttons [1] to [6]
seconds to shift to the setting mode.
mode.
The following items are switched in this order:
FR FL RR
right to adjust the distance.
mode.
mode.
seconds to shift to the setting mode.
adjustment mode.
RL Ce Wo
[FUNC] button