Eclipse CD8051 Owner's Manual page 79

How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
[AUDIO CONTROL]
button
3. Turn the [AUDIO CONTROL] button.
4. Hold down a button, [1] to [6], for more than two
5. Push the [FUNC] button.
Buttons [1] to [6]
This button adjusts the reverberation level and duration.
Turn to the right : Increases the value.
Turn to the left
seconds to preset a value.
The preset value is overwritten by the value set using
the above steps.
Direct (original sound)
Reverberation duration
High
Level
Time
Initial echo delay
The adjustment mode will be canceled and the
selected room size will now take effect.
: Decreases the value.
Initial echo]
Reverberation
[FUNC] button
Long
79