How To Operate The Tuner; Tuning To A Station - Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 Owner's Manual

[FM AM] button

How to operate the tuner

First, press the [FM• AM] button to start tuner operation.
There are automatic and manual methods for setting stations
in memory. The receiver will accept up to 24 stations in
memory: six in AM and 18 in FM (6 each for FM1, FM2 and
FM3.)

Tuning to a station

1 .
Tap the [FM• AM] button to switch to the
desired FM or AM mode.
Each tap will switch modes from FM1
AM.
2 .
Press the [
Tap the [
tune to a station manually.
To start searching for a station automatically, hold the
button down for more than one second.
[ ] button: Tunes to higher frequencies.
[ ] button: Tunes to lower frequencies.
] button to tune to a station.
] or [ ] button for less than one second to
How to operate the tuner
[ ] buttons
FM2 FM3
31