Setting A Memo - Eclipse CD8051 Owner's Manual

Basic operation
[MODE] button
[ TU ]
button

Setting a memo

1. Press and hold any number button for more than
2 . Press button [1] to select the character type.
3. Press either [
30
Buttons [1] to [5]
two seconds while the power is turned off.
The state shifts to the MEMO setting mode.
Pressing the button will switch types from [ABC]
(alphabet characters) to [123] (numeric characters) and
then [!&?] (symbols).
TU ] to select the position in which
to enter the character.
The character will be inserted where the cursor is
Flashing:
[TU ] button: Moves the cursor to the right.
[TU ] button: Advances the cursor to the left.
[ BND ] button