Entering Stations Into Memory Automatically (The Automatic Preset Mode: Asm) - Eclipse CD8051 Owner's Manual

[ TU ]
button
2 .
At times, it may be difficult to maintain optimum reception
because the antenna affixed to your vehicle is in motion
constantly (relative to the broadcast antenna), encountering
continuous variation in the received radio signals' strength.
Other factors affecting reception include interference from
natural obstacles, sign posts, etc.
Entering stations into memory automatically
(The automatic preset mode: ASM)
1 .
Press the [ TU ] button to tune to a station.
Tap the [ TU ] button for less than one second to
tune to a station manually.
To start searching for a station automatically, hold the
button down for more than one second.
[TU ] button: Tunes to higher frequencies.
[TU ] button: Tunes to lower frequencies.
Tap the [ BND ] button to switch to the
desired FM or AM bands.
[BND ] button Switch the FM band.
[BND ] button: Switch the AM band.
It is also possible to change the numbers of FM and AM
bands in a certain combination of them (See Page 56).
How to operate the tuner
Pressing the button repeatedly
switches the FM band in the order of
FM2 ... .
FM1
Pressing the button repeatedly
switches the AM band in the order of
AM2 ... .
AM1
[ BND ] button
47