How to operate the tuner
[BAND/ASM] button
There are automatic and manual methods for setting stations in memory.
The main unit will accept up to 24 stations in memory: six in AM and 18 in
FM (6 each for FM1, FM2 and FM3.) (Initial setting)
Listening to the tuner
1
Switch to tuner mode.
For detail, refer to "Switching Audio Mode" on page 24.
Tuning to a station
Press the [BAND/ASM] button for less than one second to
1
switch to the desired FM or AM bands.
Radio bands will switch from FM1 FM2 FM3 AM in order
each time the button is pressed.
2
Press the [TRACK/SEEK] button to tune to a station.
: Tunes to higher frequencies.
: Tunes to lower frequencies.
Press and hold the [TRACK/SEEK] button to start the
3
automatic station search.
: Starts searching toward higher frequencies.
: Starts searching toward lower frequencies.
At times, it may be difficult to maintain optimum reception because
ATTENTION
the antenna affixed to your vehicle is in motion constantly (relative
to the broadcast antenna), encountering continuous variation in the
received radio signals・ strength. Other factors affecting reception
include interference from natural obstacles, sign posts, etc.
How to operate the tuner
[TRACK/SEEK] button
51