How To Operate The Tuner; Listening To The Tuner; Tuning To A Station - Eclipse CD1200 Handy Reference Manual

How to operate the tuner
rnATTENTION
• If stations have been stored in memory,
pressing a button from [1] to [6] will directly
select a station. (Refer to "Manually storing
stations into memory" on page 32)
Listening to the tuner
II
Switch to tuner mode.
For details, refer to "Switching Audio
Modes" on page 14.
Tuning to a station
There are automatic and manual methods for
setting stations in memory. The main unit will
accept up to 24 stations in memory: 6 in AM 18 in
FM (6 each for FM1, FM2 and FM3.) (Initial
setting)
1
Press the [BAND/ASM] button for
less than one second to switch to
the desired FM, AM bands.
Radio bands will switch from FM 1 ~
FM2 ~ FM3 ~ AM in order each time
the button is pressed.
I!I
Press the [TRACK/SEEK] button to
iii
tune to a station.
~:
Turns to higher frequencies.
......
:
Turns to lower frequencies.
How to operate the tuner
I
Press and hold the [TRACK/SEEK]
button to start the automatic
station search.
~:
Starts searching toward higher
frequencies.
......
:
Starts searching toward lower
frequencies.
rnATTENTION
At times, it may be difficult to maintain
optimum reception because the antenna
affixed to your vehicle is in motion constantly
(relative to the broadcast antenna),
encountering continuous variation in the
received radio signal's strength. Other factors
affecting reception include interference from
natural obstacles, sign posts, etc.
31
• •