ESI 48-Key Feature Phone User Manual page 38

Special keys
Adding names to your Personal Dex
You can add names to your Personal Dex by using either the Caller ID method or the manual method.
The Caller ID method is the same regardless of whether you're using a 24-Key or 48-Key Feature
Phone; however, the manual method is used differently on each phone model.
Caller ID method (on either Feature Phone)
Whenever a Caller ID name appears on your LCD display (while talking on an incoming call or during
message retrieval) press ESI-DEX to automatically store the name and number in your Personal Dex.
The display confirms:
Manual method (on the 24-Key Feature Phone)
While your station is idle, press ESI-DEX until prompted to "ADD-A-NAME" . . .
. . . and then enter the name and the number as prompted.
Note: If needed, press HELP for assistance.
1. To enter each character for the name, press the dialpad key that includes the desired character.
The key's possible character entries will change each time you press the key.
2. When the desired character appears, press # to confirm its entry. The cursor will move to the next
character position. Use
Example: To enter a B, press 2 twice (the possible options through which to scroll are A, B, C and 2).
When B appears, press # to confirm and move to the next entry.
3. Repeat steps 1–2 until the name is complete. The name may contain up to 15 characters (a space
is a character, too).
4. Press # again when finished entering the name.
5. Now, enter the number — including the line access code 9 (or 8 or 7).
Note: Use the scroll key to enter special characters; use the
use the scroll keys to view the number after it's saved. To change the number, you must delete it
and then re-enter it as desired.
6. Press # to confirm the entry.
F.4
24-Key
Feature
Phone
and (the scroll keys) to back up or to insert a space.
48-Key
Feature
Phone
scroll key to backspace. You also can
User's Guide