ESI 48-Key Feature Phone User Manual page 37

User's Guide
. . . On the 48-Key Feature Phone
1. While your station is idle (or just after receiving dial tone), press ESI-DEX. This causes the Esi-Dex
menu to appear, as shown:
2. Press a key to choose the appropriate Dex —Station Dex (STA), System Dex (SYS), or Personal
Dex (PER) — or press RELEASE to cancel the procedure.
Notes: System Dex is not available on every system.
For the remainder of this example, we'll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
The display now reads:
3. Select the desired name from the selected Dex, using one of two methods.
Either:
(a.) Press the scroll keys ( and ) to look up and down through the Dex until you find the name
(names will appear in the order in which they were stored in the Dex);
. . . Or . . .
(b.) Press the dialpad key that contains the first three letters of the person's name. For example: if you
want to call John Doe, press 5 — because it contains the letters J K L. You will begin to see
names that begin with those letters (again, names will appear in the order in which they were
stored in the Dex). Keep pressing the dialpad key until the desired name and number appear:
4. Press DIAL to place the call.
Special keys
F.3