Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without DO NOT allow the pump to run dry, as this will cause serious damage to the prior notice.
38 metres. If this should be the case then the height must be reduced. Should you still experience problems, then contact your Clarke dealer, or CLARKE International Service Department for advice. From mains supply, connect:- To Motor 1.
However, accessories designed specifically for this to the pump, ensure that adequate support is range of pumps are available from your CLARKE dealer and are listed on page 7. provided to the hoses and/or pipes. Remember...
Need help?
Do you have a question about the TAM100 7230035 and is the answer not in the manual?
Questions and answers