CLARKE Water Pump, which is a general purpose pump, suitable for a variety of applications involving the transfer of clean, cold water ONLY. The CEB101 differs from the TAM 100 model in that it has a brass body designed for longer life, and an increased resistance to corrosion.
Please note that the details and specifications contained herein, are correct at the time of going to Ensure the cable gland is correctly used. print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the pump’s data plate The clamp must firmly clamp the outer cable sheath and NOT the conductors.
PRIMING Inlet Port range of pumps are available from your CLARKE dealer and are listed on page 7. When suction lift is used to draw water into The pump must always be installed and operated in a horizontal position i.e. with the pump it is essential that all connections the outlet port facing vertically upwards.
Need help?
Do you have a question about the TAM101 and is the answer not in the manual?
Questions and answers