5.4 Power off projector
How to power off
1. Press
key of the remote, a message displays on the projector's screen.
2. Press
key again to confirm, otherwise the message disappears after 5 seconds.
3. Let cool down the projector until the fan stop. At least 15 seconds for cooling cycle.
4. Disconnect the power cord from the power net.
5.5 Range of effective remote control signal reception
The diagram below illustrates the range of effective remote control signal reception.
5.6 Source selection
Press
HOME
on the remote control to activate OSD Lite on Screen, then select "
PFWX-51B/PFWU-51B 10/02/2014
Downloaded From projector-manual.com Barco Manuals
C
AUTION: Never disconnect the power cord before the fan stop.
Avoid placing the remote control at places of high temperature or humidity as it could cause the remote
control to malfunction.
40°
40°
" for the desired source.
INPUT
5.Getting Started
35