2. U Sing The Basic Functions Of Your Videophone; Placing A Call; Placing A Call Using The Keypad; Placing A Call In Standby Mode (When The Lcd Screen Is Off) - ACN Videophone User Manual

2. U sing the Basic Functions of your Videophone
2-1. p
lACiNg A CAll
2-1-1. p
lACiNg A CAll usiNg the keYpAd
Pick up the handset or press the "Speaker" button
• Enter the phone number
• Press the "Call" button
NOTE: Refer to Section 3-2 for instructions on entering characters. The keypad tones are switched off by default.
If you would like to switch on the keypad tones, refer to Section 3-6-1-3 Sound.
2-1-2. p
lACiNg A CAll iN stANdBY Mode
Enter the first digit of the phone number
• A window will appear on the screen
• Enter the remaining digits of the phone number
• Press the "Call" button
2-1-3. p
lACiNg A CAll FroM Your
Press the "MENU" button
• Use the navigation buttons "
• Press the "OK" button
• S elect the category of the number you would like to call (Total Calls, Answered Calls, Dialled Numbers, Missed Calls) by using the
navigation buttons "
• Press the "OK" button
• Use the navigation buttons "
• Press the "OK" button
• Use the navigation buttons "
• Press the "OK" button
C
All
" to select "Call Log"
" (for example: select "Dialled")
" to select the desired number
" to select "Make A Call"
( lCd
WheN the sCreeN is oFF
l
og
)
9