1-4. Installing Your Videophone - ACN Videophone User Manual

(19) RIGHT NAVIGATION
(20) STATUS
(21) CAPS
(22) MY APPLICATIONS
(23) REDIAL
(2) SPEAKER
(2) CALL
1-4. Installing your Videophone
Please check to ensure you have the following components before installing your Videophone. For optimal results, please follow the
installation procedures provided in the Quick Installation Guide, which is included with your Videophone.
Connect the handset to the connection point located on
the side of your ACN Videophone.
Connect the Ethernet cable to the WAN port.
NOTE: Your Videophone may take up to 3 minutes before it is ready to use. During this time the system will perform an initial software
update and connect to ACN's Digital Phone Service. The LCD screen will display a status as it moves through the process. When the
process is complete, the registration light will turn green.
Right navigation button.
Lists information needed for technical support i.e. configuration and software
version
Allows you to enter capital letters and selects the type of letters or characters to
enter. Switches between numeric, lower-case letters and upper-case letters.
Lists available applications.
Makes a call to the last number dialled.
Activates/deactivates the speakerphone.
Makes a call to the dialled number.
Connect the power adaptor to the power port.
Turn the Power Switch on.
8