Sending A Fax Scanning Adjustment - Brother MFC-9180 Owner's Manual

2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT to send a light document. Use DARK to send a dark document. This setting is a temporary
setting only.
1
Insert the document face up in the ADF, or face down on the glass platen. (See Setting the
Document, page 1.)
2
Press Menu/Set, 2, 2, 1.
3
Use or
4
When the screen displays your selection, press Menu/Set.
5
Press 2 if you are finished choosing settings, and go to Step 6—OR—Press 1 if you want to
select additional settings. The display returns to Setup Send menu.
6
Enter a fax number and press Fax Start.
Fax Resolution
When you have a document in the ADF, or on the glass platen, you can use the Fax Resolution
key to temporarily change the setting. Press Fax Resolution repeatedly until the LCD shows the
setting you want.
—OR—
You can change the default setting.
1
Press Menu/Set, 2, 2, 2.
2
Press or
3
Press Stop/Exit.
STANDARD: Suitable for most typed documents.
FINE:
S.FINE:
PHOTO:
to select AUTO, LIGHT, or DARK.
to select the resolution you want, and then press Menu/Set.
Good for small print; transmits a little slower than Standard resolution.
Good for small print or artwork; transmits slower than Fine resolution.
Use when document has varying shades of grey; slow transmission time.
23
Sending a Fax