Zanussi ZCC 6680 Instruction Booklet page 22

2. The Cooking Duration symbol
flashing; during this time push
to select the pyrolytic 1 (P I) or pyrolytic 2 (P 2)
function.
3. Once you have chosen the desired pyrolytic func-
tion, the "Pyro" writing will flash in the display
waiting for confirmation to start the pyrolytic
cleaning function.
At this time, push the time function button
the "End of Cooking" symbol
symbol will flash (Fig. 24). The control panel will
display the end of the cleaning cycle (that is, the
actual time + cooking duration time).
Push or buttons to select the required end
of cycle time (Fig. 24). After a few seconds, the
"Pyro" writing will stop flashing, the acoustic signal
will stop while the symbol
the pyrolytic cleaning cycle start.
This means that the the pyrolytic cleaning cycle
has been set at a programmed time and it is
necessary to remove the shelf supports and all the
oven accessories from the oven.
At the set time, the oven lamp will switch off and
the pyrolytic cleaning cycle starts.
4. After some time, the door lock will be activated and
the related symbol
At the end of the pyrolitic cleaning process, the
display shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal
will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, press
button .
Oven lamp replacement
Disconnect the appliance from the electricity
supply.
If the oven bulb needs replacing, it must comply with
the following specifications: electric power, 40 W; electric
rate, 230 V (50 Hz); resistant to temperatures of 300°C;
connection type: E14. These bulbs are available from
your local Service Force Centre.
!
To replace the faulty bulb:
1. Ensure the oven is disconnected from the
electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace it with the
new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
22
will start
or buttons
until
and the arrow
will flash until
will be displayed.
Fig. 24
Fig. 25