Zanussi ZCC 6680 Instruction Booklet page 21

2. The Cooking Duration symbol
seconds; during this time push
select the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function
(Fig. 21).
3. Once you have chosen the desired pyrolytic function
(P I or P 2), the "Pyro" writing will flash in the display
waiting for confirmation to start the pyrolytic cleaning
function.
4. To confirm which pyrolytic function you desire, press
button . The "Pyro" writing will stop flashing and
the symbol
signal will stop, the oven lamp will switch off and the
pyrolytic cleaning cycle starts (Fig. 22).
As soon as the oven heats up, the thermometer
symbol rises slowly
temperature inside the oven is increasing.
5. After some time, the door lock will be activated and
the related symbol
At this time the button
At the end of the pyrolitic cleaning process, the display
shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will
be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, press
button .
NOTE: The time indication is comprehensive of the
cooling down time.
If you select a cooking function while the pyrolytic
function is active, the cleaning cycle will be
interrupted. If the oven door lock is activated, it is
impossible to select any cooking function until
the door lock is off.
To programme the pyrolytic
cleaning cycle (delayed start,
automatic stop)
If you desire, you can programme the starting and
ending time of the pyrolytic cleaning cycle.
1. Press button to switch on the oven. Press the
button as often as necessary, until the pyro-
lytic function symbol
the display.
Simultaneously the "Pyro" writing and the symbol
indicating the shelf supports
the display and an acoustic signal will be emitted.
This means that, before activating the pyrolytic
cleaning function, you have to remove the shelf
supports and all the oven accessories (see
instructions given in the previous paragraph).
will flash for 5
or buttons to
will disappear, the acoustic
, indicating that the
will be displayed (Fig. 23).
is no more active.
(level 1 - P I) appears in
will flash in
Fig. 21
Fig. 22
Fig. 23
21