Installation - Zanussi ZCC 5061 Instruction Book

INSTALLATION

Placement
Remove the plastic packaging and install
the cooker in a dry, ventilated room (fig. 15)
not near curtains, paper, alcohol, petrol,
etc...)
The appliance has to be set on a heatproof
soil.
This appliance belongs to class "1" in
matters of protection against overheating of
surrounding surfaces.
Ventilation
Gas combustion is possible due to the
3
60 cm
oxygen in the air (2 m air/h x kW installed
power – check the rating panel of the
min 15 cm
cooker).
FOUR TABLE
It is necessary to renew the air and that the
CGL 404
combustion products be discharged.
The air flow must come directly through
openings of external walls having a free
2
passage of at least 100 cm .
These openings should be realized
preferably positioned near the floor,
fig. 15
opposite the combustion products
discharge. It should not be occluded both
from inside and outside.
19