Copy Density Adjustment; Automatic Copy Density Mode - imagistics im2330 Operator's Manual

6. Copy Density Adjustment

There are 2 types of copy density adjustment: the automatic copy density mode and the manual copy den-
sity mode. In the automatic copy density mode, the equipment automatically selects the most appropriate
copy density by detecting the density of the original. In the manual copy density mode, you can adjust the
copy density manually according to the conditions of the original.
• Default setting: Automatic density mode

Automatic copy density mode

3
1
Place paper in the drawer(s).
2
Place the original(s).
3
Confirm that the [AUTO] button on the basic menu is selected. If it is
not, press the button.
• Set other copy modes as required.
4
Press the [START] button.
120
3.SETTING OF BASIC COPY MODES