Automatic Door Release Kit; Automatic Door Release Kit Overview - HP MCS-200 User Manual

Automatic Door Release Kit

Automatic Door Release Kit Overview

The Automatic Door Release Kit is designed as a safety mechanism in the event that the MCS-200 unit shuts
off unexpectedly. If the MCS-200 unit shuts off unexpectedly, the electromagnetic locks on the front door, the
rear master door, and the rear slave door are immediately deactivated. This deactivation of the
electromagnetic locks will cause the release springs on each door to spring the rack doors open and allow
air flow and cooling to the servers in the rack.
The Automatic Door Release Kit is included with your MCS-200 unit. For specific installation instructions, see
the HP Modular Cooling System Automatic Door Release Kit Installation Instructions included with the kit.
Automatic Door Release Kit
To view the HP Automatic Door Release hardware installation instructions, see the HP Modular Cooling
System Rack Options Installation Guide.
To enable the automatic door release:
Click Setup>Advanced.
1.
In the Emergency Door Opening field, select Enable.
2.
When the function has been enabled, an indicator appears on the Home tab showing the current status of the
rack doors. Also, a new button appears on the Advanced tab, enabling you to test the feature.
Automatic Door Release Kit 30