Powering Up And Configuring The Unit - HP MCS-200 User Manual

If the rear extension is installed, this step is optional. Using two M6 trilobe flathead screws, secure the
12.
two brackets to the MCS-200 unit frame. For more details on how to install the brackets, see the HP
Modular Cooling System 200/100 Options Installation Guide.
Align the access panel with the two brackets.
13.
Using two M6 flathead screws, secure the access panel to the brackets on the MCS-200 unit frame.
14.

Powering up and configuring the unit

Installation 13