Checking The Transmission/Reception Result From The Message Window; About The Reports And Lists; Printing The Reports And Lists - Epson AcuLaser CX37DNF User Manual

Note:
To return to the Fax mode screen, press the Stop/Reset key.

Checking the Transmission/Reception Result From the Message Window

The results of a maximum of 60 fax transmissions/receptions can be viewed.
In addition, the transmission/reception results that are displayed can be printed by pressing the Start
(B&W) key.
1. Press the u or d key to select REPORT/STATUS, and then press the Select key.
2. Press the u or d key to select TX/RX RESULT, and then press the Select key.
The TX/RX RESULT screen appears and displays the communications log.
Note:
To return to the Fax mode screen, press the Select key.

About the Reports and Lists

Reports on the status of fax transmissions/receptions and the speed dial settings can be printed.
The following reports and lists can be printed with this machine.
Note:
For details on printing the reports and the lists, refer to the following section.

Printing the Reports and Lists

1. Press the u or d key to select REPORT/STATUS, and then press the Select key.
2. Press the u or d key to select REPORT, and then press the Select key.
3. Press the u or d key to select the desired report, press the Select key, and then Start key.
The report is printed
Epson AcuLaser CX37DNF Facsimile User's Guide
Confirmation Mode 68