Changing/Deleting Group Dial Information - Epson AcuLaser CX37DNF User Manual

❏ If the destination is already registered with the specified group dial number, REGISTERED!
appears. Press the Back key to return to the DIAL REGISTER screen, and then continue with step
3.
5. Enter the name of the group dial destination to be registered, and then press the Select key.
Note:
❏ Text up to 20 characters long can be entered for the name.
❏ For details on entering/editing text and the characters that can be entered, refer to "Entering
Text" on page 78.
6. Use the keypad to type in the speed dial number to be registered with the group dial destination,
and then press the Select key.
Note:
❏ To program a group dial number registered with a group dial destination, press the
Addressbook key, type in the group dial number and then press the Select key.
❏ For details on entering/editing text and the characters that can be entered, refer to "Entering
Text" on page 78.
7. Press the Select key again.
8. Check that ADD is selected, and then press the Select key. Repeat steps 6 through 8 until all desired
destinations are specified.
❏ If no more recipients are to be specified, continue with step 9.
9. Select FINISH, and then press the Select key.
The destinations are registered as the group dial destination.
Note:
To return to the Fax mode screen, press the Back key until the Fax mode screen appears, or press the
Stop/Reset key.

Changing/Deleting Group Dial Information

The registered group dial information can be changed.
1. Press the u or d key to select UTILITY, and then press the Select key.
Epson AcuLaser CX37DNF
Registering Recipients
Facsimile User's Guide
65