Sending A Fax To A Combination Of Fax Numbers (Chain Dial) - Epson AcuLaser CX37DNF User Manual

❏ If FAX TX in ADMIN. MANAGEMENT/PASSWORD SETTING/FULL FUNC. NO. has been
restricted, type in the number specified for FULL FUNC. NO. after pressing the Start key.

Sending a Fax to a Combination of Fax Numbers (Chain Dial)

Multiple fax numbers can be combined to specify the recipients. This is called "chain dialing".
For example, if the phone number and the extension number of a recipient are registered as different
speed dial destinations, the fax number of the recipient can be specified by combining the two
numbers.
1. Position the document to be faxed.
2. If desired, select the image quality.
Note:
For details, refer to "Selecting the Image Quality" on page 26.
3. Press the On hook key.
4. Directly type in the first number, or select it from the favorite list or speed dial destinations.
Note:
Refer to "Specifying a Recipient" on page 27.
5. Directly type in the second number, or select it from the favorite list or speed dial destinations.
6. Press the Start key to begin scanning and sending the fax.
Note:
❏ To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation
to cancel the setting. Select YES, and then press the Select key.
❏ If FAX TX in ADMIN. MANAGEMENT/PASSWORD SETTING/FULL FUNC. NO. has been
restricted, type in the number specified for FULL FUNC. NO. after pressing the Start key.
Epson AcuLaser CX37DNF Facsimile User's Guide
Sending Faxes 41