Table of Contents
Advertisement
DUPLEX PRINT
REPORTING Menu
Note:
Manufacturer's default settings appear in bold.
ACTIVITY REPORT
TX RESULT REPORT
RX RESULT REPORT
Epson AcuLaser CX37DNF
Settings
DISABLE / ENABLE
Select whether or not both sides of the paper is printed on when a docu-
ment containing multiple pages is received.
Note:
Duplex printing cannot be performed when the paper size is 8 1/2 × 13 1/2.
Settings
OFF / ON
After every 60 transmissions/receptions, a report can be printed to show
the results of the transmissions/receptions. Select whether the report is
printed automatically when the 60th transmission/reception is reached.
Settings
ON / ON(ERROR) / OFF
Select whether the report showing the result of a transmission is printed
automatically after the transmission is finished.
❏
ON: Prints the report after each transmission.
❏
ON(ERROR): Prints the error details together with a reduced image of
the first page of the document when a transmission error has occurred.
❏
OFF: Does not print the report after each transmission, even if an error
has occurred.
The transmission result report is normally printed after a broadcast trans-
mission.
Settings
ON / ON(ERROR) / OFF
Select whether the report showing the result of a reception is printed au-
tomatically after the reception is finished.
❏
ON: Prints the report after each reception.
❏
ON(ERROR): Prints the report after a reception only if an error occurred.
❏
OFF: Does not print the report after each reception, even if an error has
occurred.
Control Panel and Configuration Menu
Facsimile User's Guide
18
Advertisement
Table of Contents
